B&K Plastics · Resin store & BOM
Materials
The engineering thermoplastics behind every moulded part — stock on hand against reorder, and the bill of materials that turns kilos of resin into finished parts.
Resins tracked
9
shared group store
Below reorder
2
needs ordering
Resin stock value
$54.8k
on hand, ex-GST
Used this month
6,990 kg
across all lines
Resin store
| Resin | Supplier | On hand | $/kg | Used / mo | Status |
|---|---|---|---|---|---|
| RES-101 Nylon 66 (PA66) Ultramid A3K | BASF / Cablemakers AU | 1,850 kg reorder at 800 | $6.40 | 1,120 kg | In stock |
| RES-102 Acetal (POM) Delrin 500P | DuPont / Dotmar | 540 kg reorder at 600 | $7.10 | 410 kg | Below reorder |
| RES-103 Polyurethane (PU) Elastollan 1185A | Era Polymers (Sydney) | 320 kg reorder at 250 | $9.80 | 180 kg | In stock |
| RES-104 UHMWPE GUR 4120 | Celanese / Dotmar | 2,600 kg reorder at 1,200 | $5.20 | 1,740 kg | In stock |
| RES-105 HDPE Alkatuff 3540 | Qenos (Altona) | 410 kg reorder at 900 | $2.90 | 980 kg | Below reorder |
| RES-106 Polypropylene (PP) Moplen HP500N | LyondellBasell / Cablemakers | 3,100 kg reorder at 1,000 | $2.45 | 1,320 kg | In stock |
| RES-107 Polycarbonate (PC) Lexan 143R | SABIC / Dotmar | 760 kg reorder at 400 | $8.60 | 290 kg | In stock |
| RES-108 ABS Cycolac MG47 | SABIC / Plastral | 880 kg reorder at 500 | $4.30 | 520 kg | In stock |
| RES-109 Polyethylene (PE) Alkatane LL | Qenos (Altona) | 1,240 kg reorder at 500 | $2.70 | 430 kg | In stock |
Bill of materials
Resin and shot weight per part — drives each job's material requirement and cost.
| Part | Resin | g / part | Cav. | Cycle | Material $/part |
|---|---|---|---|---|---|
| BK-2010Specimen Jar Base 70mL | Polypropylene (PP)RES-106 | 59 g | 6 | 46s | $0.14 |
| BK-2011Specimen Jar Screw Lid 70mL | Polypropylene (PP)RES-106 | 51 g | 7 | 47s | $0.12 |
| BK-2024Luer Fitting Cap | Polycarbonate (PC)RES-107 | 9 g | 5 | 14s | $0.08 |
| BK-2031Diagnostic Housing Shell | ABSRES-108 | 429 g | 4 | 21s | $1.84 |
| BK-2050Rebar Spacer Wheel 40mm | Polypropylene (PP)RES-106 | 39 g | 7 | 40s | $0.10 |
| BK-2051Rebar Spacer Wheel 50mm | Polypropylene (PP)RES-106 | 44 g | 8 | 41s | $0.11 |
| BK-2062Cable Saddle 25mm | Nylon 66 (PA66)RES-101 | 6 g | 7 | 52s | $0.04 |
| BK-2063Junction Box Housing IP65 | ABSRES-108 | 372 g | 1 | 53s | $1.60 |
| BK-2071Formwork Tie Cone | HDPERES-105 | 71 g | 7 | 15s | $0.21 |
| BK-2090Drive Gear 32T Module 1.5 | Acetal (POM)RES-102 | 181 g | 5 | 34s | $1.29 |
| BK-2091Thrust Washer 25mm | Acetal (POM)RES-102 | 22 g | 7 | 35s | $0.16 |
| BK-2098Bearing Bush Flanged 20mm | Nylon 66 (PA66)RES-101 | 55 g | 3 | 42s | $0.35 |
| BK-2104Anti-Vibration Mount Pad | Polyurethane (PU)RES-103 | 76 g | 1 | 48s | $0.74 |