Mining Parts Australia · Resin store & BOM
Materials
The engineering thermoplastics behind every moulded part — stock on hand against reorder, and the bill of materials that turns kilos of resin into finished parts.
Resins tracked
9
shared group store
Below reorder
2
needs ordering
Resin stock value
$54.8k
on hand, ex-GST
Used this month
6,990 kg
across all lines
Resin store
| Resin | Supplier | On hand | $/kg | Used / mo | Status |
|---|---|---|---|---|---|
| RES-101 Nylon 66 (PA66) Ultramid A3K | BASF / Cablemakers AU | 1,850 kg reorder at 800 | $6.40 | 1,120 kg | In stock |
| RES-102 Acetal (POM) Delrin 500P | DuPont / Dotmar | 540 kg reorder at 600 | $7.10 | 410 kg | Below reorder |
| RES-103 Polyurethane (PU) Elastollan 1185A | Era Polymers (Sydney) | 320 kg reorder at 250 | $9.80 | 180 kg | In stock |
| RES-104 UHMWPE GUR 4120 | Celanese / Dotmar | 2,600 kg reorder at 1,200 | $5.20 | 1,740 kg | In stock |
| RES-105 HDPE Alkatuff 3540 | Qenos (Altona) | 410 kg reorder at 900 | $2.90 | 980 kg | Below reorder |
| RES-106 Polypropylene (PP) Moplen HP500N | LyondellBasell / Cablemakers | 3,100 kg reorder at 1,000 | $2.45 | 1,320 kg | In stock |
| RES-107 Polycarbonate (PC) Lexan 143R | SABIC / Dotmar | 760 kg reorder at 400 | $8.60 | 290 kg | In stock |
| RES-108 ABS Cycolac MG47 | SABIC / Plastral | 880 kg reorder at 500 | $4.30 | 520 kg | In stock |
| RES-109 Polyethylene (PE) Alkatane LL | Qenos (Altona) | 1,240 kg reorder at 500 | $2.70 | 430 kg | In stock |
Bill of materials
Resin and shot weight per part — drives each job's material requirement and cost.
| Part | Resin | g / part | Cav. | Cycle | Material $/part |
|---|---|---|---|---|---|
| MPA-1042Conveyor Idler End Cap 152mm | Nylon 66 (PA66)RES-101 | 271 g | 7 | 44s | $1.73 |
| MPA-1043Idler Roller Bush 35mm | Acetal (POM)RES-102 | 139 g | 2 | 45s | $0.99 |
| MPA-1051Dust Seal Labyrinth Ring 6204 | Nylon 66 (PA66)RES-101 | 137 g | 7 | 53s | $0.88 |
| MPA-1066Modular Screen Panel 305x305 — 8mm | Polyurethane (PU)RES-103 | 845 g | 5 | 22s | $8.28 |
| MPA-1067Modular Screen Panel 305x305 — 12mm | Polyurethane (PU)RES-103 | 845 g | 6 | 23s | $8.28 |
| MPA-1074Skirting Clamp Wedge | UHMWPERES-104 | 528 g | 6 | 30s | $2.75 |
| MPA-1080Chute Wear Strip 600mm | UHMWPERES-104 | 1,969 g | 1 | 36s | $10.24 |
| MPA-1090Cyclone Apex Liner 75mm | Polyurethane (PU)RES-103 | 1,883 g | 1 | 46s | $18.45 |
| MPA-1091Slurry Pump Gland Seal | Acetal (POM)RES-102 | 342 g | 4 | 47s | $2.43 |
| MPA-1102Pulley Lagging Tile 100x100 | Polyurethane (PU)RES-103 | 365 g | 4 | 58s | $3.58 |
| MPA-1110Roller Disc Return 152mm | HDPERES-105 | 1,443 g | 7 | 20s | $4.18 |
| MPA-1115Conveyor Guide Roller Sleeve | UHMWPERES-104 | 402 g | 1 | 25s | $2.09 |